Search

found 14 results

Images for ties; more images...

Images, UC QuakeStudies

A photograph of a tower of the Arts Centre taken from Rolleston Avenue near the Botanic Gardens. A wooden structure has been wrapped around the tower and secured with tie-downs in order to help reduce damage by further aftershocks.

Images, UC QuakeStudies

A photograph of the Arts Centre taken from Rolleston Avenue near the Botanic Gardens. The building has been cordoned off by wire fencing and a wooden structure has been secured to the tower with tie-downs to help reduce damage from further aftershocks.

Images, eqnz.chch.2010

Laura Young and I tying down tarps over the hole in the roof. We did what we could to tie it down with tension and weigh it down with bricks tied to the tarps. Why? Because gale-force winds are predicted for tomorrow (Sunday) and rain on Tuesday.

Images, UC QuakeStudies

A photograph of the Cranmer Courts on the corner of Kilmore and Montreal Streets. One of the gables has crumbled and ties have been placed around the rest to limit further damage from aftershocks. Pigeons are roosting on the edge.

Images, UC QuakeStudies

A photograph of the earthquake damage to the Cranmer Courts on the corner of Montreal and Kilmore Streets. One of the gables of the section of the building on the corner has crumbled. Ties have been placed around all of the gables as bracing.

Images, UC QuakeStudies

A photograph of the earthquake damage to the Cranmer Courts on the corner of Montreal and Kilmore Streets. The tops of the gables of the section of the building on the corner have crumbled. Ties have been placed around all of the gables as bracing.

Images, Canterbury Museum

One yellow faux fur duck with polar fleece fabric bill and feet; black embroidered eyes and yellow satin ribbon around neck; stuffed with Dacron and beans. Tied to the security fence surrounding the Dux de Lux restaurant and bar following its closure after the 22 February 2011 earthquake. The Dux de Lux, on the corner of Hereford and Montreal S...

Images, UC QuakeStudies

Members of the University of Canterbury's E-Learning team in their temporary office in the James Hight building. The photographer comments, "First looks at our new temporary (maybe) office space. Our group will stay here until April or May 2011, then will move to another floor in the Central Library. First briefing. Warren Marett, an acting manager from Deloittes (with tie), discusses our move with Electronic Learning Media staff; Alan Hoskin, Antoine Monti, Herbert Thomas, Paul Nicholls, and Jess Hollis".

Images, UC QuakeStudies

A photograph of the Thai Temple restaurant on the corner of Colombo and Peterborough Streets. A red sticker has been placed on the front door, indicating that the building is unsafe to enter. Tape has been placed around the building as a cordon. A sign reading, "Strawberry Fare, yes we are open, we are sorry for any inconvenience" has been tied to a lamp post in front.

Research papers, University of Canterbury Library

Research Report: 2010-02 The objective in writing this report is to provide a guide to structural engineers on how to assess the potential seismic performance of existing hollow-core floors in buildings and the steps involved in the design of new floors. Hollow-core units in New Zealand do not contain stirrups within the precast concrete section. This is due to the way that they are manufactured. The only reinforcement in the great majority of hollow-core units consists of pretensioned strands that are located close to the soffit. A consequence of this is that hollow-core units have a number of potential brittle failure modes that can occur when adverse structural actions are induced in the units. These adverse actions can be induced in a major earthquake due to the relative vertical, horizontal and rotational displacements that occur between hollow-core units and adjacent structural elements, such as beams or structural walls. A number of large scale structural tests backed up by analytical research has shown that extensive interaction occurs between floors containing prestressed precast units and other structural elements, such as walls and beams. The constraint that prestressed units in a floor can apply to adjacent beams can result in an increase in strength of the beams to a considerably greater strength than that indicated in editions of the New Zealand Structural Concrete Standard published prior to 2006. The extent of this increase is such that it could in some cases result in the development of a non-ductile failure mechanism instead of the ductile failure mechanism assumed in the design. Prestressed floor units tie the floor bays together leaving a weak section where the floor joins to supporting structural elements. The restraint provided by the prestress restricts the opening of cracks within the bay. In the event of an earthquake this restraint can result in wide cracks developing at some of the boundaries to floor bays. These cracks may have a significant influence on the performance of the floor when it acts as a diaphragm to transfer seismic forces to the lateral force resisting structural elements in the building. The report contains details of; 1. The different failure modes, which may be induced in hollow-core floors, and the failure modes that may develop in a buildings due to the presence of hollow-core units in the floors; 2. Criteria that may be used to assess the magnitude of the design earthquake which may be safely resisted by a hollow-core floor in a building; 3. Details of how construction practice related to the use of hollow-core floors in New Zealand has changed over the last five decades. This highlights particular aspects that need to be considered in carrying out an assessment of existing hollow-core floors; 4. Information on how a new hollow-core floor may be designed to be consistent with the Earthquake Actions Standard, NZS1170.5: 2004 and the Structural Concrete Standard, NZS3101: 2006 (plus Amendment 2); 5. A review of the research findings relevant to the behaviour of New Zealand hollow-core floors under earthquake conditions. Research that was used to develop the assessment and design criteria is described together with details of how the different criteria were developed from this work.