A document containing the flipcharts from the SCIRT and the New Zealand Red Cross design thinking workshop.
A document that defines the requirements and objectives of design activities for SCIRT's reconstruction of the city's horizontal infrastructure and describes how these activities should be implemented.
A plan which describes how SCIRT will carry out design work. The first version of this plan was produced on 1 September 2011.
A guideline to inform designers of the pipe profilometer operation, including requesting profile surveys, standards and assessments of the survey results.
A document created in 2011, demonstrating the design parameters for the rebuild of wastewater, storm water, water supply and roading in the central city.
During the 21st century, New Zealand has experienced increasing public concern over the quality of the design and appearance of new developments, and their effects on the urban environment. In response to this, a number of local authorities developed a range of tools to address this issue, including urban design panels to review proposals and provide independent advice. Following the 2010 and 2011 Canterbury earthquake sequence, the commitment to achieve high quality urban design within Christchurch was given further importance, with the city facing the unprecedented challenge of rebuilding a ‘vibrant and successful city’. The rebuild and regeneration reinforced the need for independent design review, putting more focus and emphasis on the role and use of the urban design panel; first through collaboratively assisting applicants in achieving a better design outcome for their development by providing an independent set of eyes on their design; and secondly in assisting Council officers in forming their recommendations on resource consent decisions. However, there is a perception that urban design and the role of the urban design panel is not fully understood, with some stakeholders arguing that Council’s urban design requirements are adding cost and complexity to their developments. The purpose of this research was to develop a better understanding on the role of the Christchurch urban design panel post-earthquake in the central city; its direct and indirect influence on the built environment; and the deficiencies in the broader planning framework and institutional settings that it might be addressing. Ultimately, the perceived role of the Panel is understood, and there is agreement that urban design is having a positive influence on the built environment, albeit viewed differently amongst the varying groups involved. What has become clear throughout this research is that the perceived tension between the development community and urban design well and truly exists, with the urban design panel contributing towards this. This tension is exacerbated further through the cost of urban design to developers, and the drive for financial return from their investments. The panel, albeit promoting a positive experience, is simply a ‘tick box’ exercise for some, and as the research suggests, groups or professional are determining themselves what constitutes good urban design, based on their attitude, the context in which they sit and the financial constraints to incorporate good design elements. It is perhaps a bleak time for urban design, and more about building homes.
A design guideline which provides guidance to project definition and design teams on how to use Pipe Damage Assessment Tool (PDAT) outputs in their scoping and concept design work.
A guideline which defined the process and ownership of templates used by the design team and the management of the design team electronic library.
A design guideline which provides guidance to designers on how to carry out a whole of life evaluation of rebuild options.
A photograph of temporary street furniture outside the temporary Central Library on Tuam Street. The furniture was designed and fabricated by F3 Design for the Christchurch City Council.
A photograph of a public talk about temporary street furniture. The furniture was designed and fabricated by F3 Design for the Christchurch City Council. The event was part of FESTA 2012.
A photograph of a public talk about temporary street furniture. The furniture was designed and fabricated by F3 Design for the Christchurch City Council. The event was part of FESTA 2012.
A photograph of a public talk about temporary street furniture. The furniture was designed and fabricated by F3 Design for the Christchurch City Council. The event was part of FESTA 2012.
A photograph of a public talk about temporary street furniture. The furniture was designed and fabricated by F3 Design for the Christchurch City Council. The event was part of FESTA 2012.
A photograph of a public talk about temporary street furniture. The furniture was designed and fabricated by F3 Design for the Christchurch City Council. The event was part of FESTA 2012.
A submission produced by the consultancies for the ACENZ Innovate NZ Awards of Excellence 2016, providing details about how the design team supporting SCIRT was formed, and how successful design delivery was achieved.
A guideline to inform designers on the design of an Automated Flushing Siphon System as a means to reduce the frequency of blockages on the wastewater network caused by pipe dips and flat grades.
A PDF copy of a page on the EQ Recovery Learning site which linked to a YouTube video. This short video provides an insight into the design and location of the Canterbury Earthquake Memorial, due to be completed in February 2017. We meet its designer Grega Vezjak, who shares his vision for the Memorial
An entry from Deborah Fitchett's blog for 3 March 2011, posted to Livejournal. The entry is titled, "In which vegemite jars have a design flaw".The entry was downloaded on 14 April 2015.
An entry from Deborah Fitchett's blog for 3 March 2011, posted to Dreamwidth. The entry is titled, "In which vegemite jars have a design flaw".The entry was downloaded on 17 April 2015.
A paper which outlines SCIRT's approach to asset assessment, design and repair of damaged retaining walls, and presents a case study of a retaining wall rebuild, on Cunningham Terrace, Lyttelton.
A zip file containing the suite of SCIRT 12d training manuals and files.
A document which sets out the 12d standards at SCIRT.
A photograph of Andrew Just from F3 Design (left) and Martin Trusttum, CPIT Faculty of Creative Arts, giving a talk about ArtBox on the corner of St Asaph Street and Madras Street. The public talk was part of FESTA 2012.
Photo manual and guide provided to design and delivery teams at SCIRT.
A web story about the model design work by Christ's College pupils.
An early swim lane diagram which visually distinguishes responsibilities for SCIRT's ECI process.
A paper which outlines the observed damage to Christchurch City Council-owned retaining walls and the repair solutions developed.
A manual which informs SCIRT AutoCAD users of all tools, utilities, keyboard shortcuts, and tips available within the SCIRT CAD System.
A document which discusses the importance of the ECI process at SCIRT.