The cartoon shows a platter of 'Brownbait patties $2 per kilo'. In the background is a 'contaminated' river. Refers to the contamination of Canterbury's waterways after the earthquake of 4th September which resulted in sewage pipes being damaged thus contaminating the rivers. This means that people should not be attempting to catch whitebait in these rivers during the annual whitebait season which is open between 15 August and 30 November.
Quantity: 1 digital cartoon(s).
Study region: Christchurch, New Zealand. Study focus: Low-lying coastal cities worldwide are vulnerable to shallow groundwater salinization caused by saltwater intrusion and anthropogenic activities. Shallow groundwater salinization can have cascading negative impacts on municipal assets, but this is rarely considered compared to impacts of salinization on water supply. Here, shallow groundwater salinity was sampled at high spatial resolution (1.3 piezometer/km2 ), then mapped and spatially interpolated. This was possible due to a uniquely extensive set of shallow piezometers installed in response to the 2010–11 Canterbury Earthquake Sequence to assess liquefaction risk. The municipal assets located within the brackish groundwater areas were highlighted. New hydrological insights for the region: Brackish groundwater areas were centred on a spit of coastal sand dunes and inside the meander of a tidal river with poorly drained soils. The municipal assets located within these areas include: (i) wastewater and stormwater pipes constructed from steel-reinforced concrete, which, if damaged, are vulnerable to premature failure when exposed to chloride underwater, and (ii) 41 parks and reserves totalling 236 ha, within which salt-intolerant groundwater-dependent species are at risk. This research highlights the importance of determining areas of saline shallow groundwater in low-lying coastal urban settings and the co-located municipal assets to allow the prioritisation of sites for future monitoring and management.
The Resilient Shorelines study at University of Canterbury (UC) is using the Avon Heathcote Estuary Ihutai to investigate ecosystem-based approaches to conservation planning and adaptation in response to environmental change. In particular, the study is using a novel opportunity to understand effects of the Canterbury earthquakes that may be similar to impacts of sea level rise. These result from topographic and bathymetry changes in and around the estuary and associated waterways (Beaven et al., 2012; Cochran et al., 2014) that have driven changes in hydrodynamics (Measures et al., 2011). Therefore the wider context for the work reported here is to develop methodologies for modelling the impacts of sea level rise on estuaries and coastal river mouths using the Avon-Heathcote Estuary/Ihutai as a case study. Initial objectives have included establishing the magnitude of earthquake-induced changes. Subsequent steps will include establishing the relationships between strong physical drivers such as water levels and salinity, and the spatial pattern of estuarine ecosystems. There is particular focus on understanding salinity changes in the upper estuarine ecosystem in the vicinity of the freshwater-saltwater interface. In these areas, species, habitats and ecosystems that are adapted to brackish conditions are expected to migrate in response to the inland penetration of salt water under sea level rise. An example is the location of īnanga spawning habitat that is associated with the inland extent of salt water intrusion on spring tides (Taylor, 2002). It is expected to be strongly affected by sea level rise. To facilitate the development of ecosystem-based scenario models for sea level rise, a salinity model with resolution at ecological meaningful scales was required. An existing fine scale hydrodynamic model was available using Delft3D software (Deltares, 2012) that had been developed for ECan and MBIE following the earthquakes (Measures & Bind, 2013). However, it had not been calibrated for salinity. A collaborative project was designed between UC and NIWA to calibrate the model and develop a scenario modelling approach for sea level rise at a level of resolution sufficient for understanding sea level rise impacts on īnanga (whitebait) spawning habitat. The project was allocated funding from Brian Mason Scientific and Technical Trust and commenced in late 2015. The purpose of this report is to provide a description of the model development process and an illustration of model outputs from an initial set of modelled scenarios for sea level rise.
Effective management of waste and debris generated by a disaster event is vital to ensure rapid and efficient response and recovery that supports disaster risk reduction (DRR). Disaster waste refers to any stream of debris that is created from a natural disaster that impacts the environment, infrastructure, and property. This waste can be problematic due to extensive volumes, environmental contamination and pollution, public health risks, and the disruption of response and recovery efforts. Due to the complexities in dealing with these diverse and voluminous materials, having disaster waste management (DWM) planning in place pre-event is crucial. In particular, coordinated, interagency plans that have been informed by estimates of waste volumes and types are vital to ensure management facilities, personnel, and recovery resources do not become overwhelmed. Globally, a priority when formulating DWM plans is the robust estimation of disaster waste stream types and volumes. This is a relatively under-researched area, despite the growing risk of natural disasters and increasingly inadequate waste management facilities. In Aotearoa New Zealand, a nation-wide DWM planning tool has been proposed for local government use, and waste amounts from events such as the Christchurch Earthquakes have been estimated. However, there has been little work undertaken to estimate waste types and volumes with a region-specific, multi-hazard focus, which is required to facilitate detailed regional DWM planning. This research provides estimates of potential disaster waste volumes and types in the Waitaha-Canterbury region of the South Island (Te Waipounamu) for three key hazard scenarios: a M8.0 Alpine Fault earthquake with a south-to-north rupture pattern, a far-sourced tsunami using a maximum credible event model for a Peru-sourced event, and major flooding using geospatial datasets taken from available local government modelling. Conducted in partnership with Environment Canterbury and Canterbury CDEM, this estimation work informed stakeholder engagement through multi-agency workshops at the district level. This research was comprised of two key parts. The first was enhancing and extending a disaster waste estimation model used in Wellington and applying it to the Canterbury region to quantify waste volumes and types. The second part was using this model and its estimates to inform engagement with stakeholders in multi-agency, district-level workshops in Kaikōura, Hurunui, and Waimakariri. In these workshops, the waste estimates were used to catalyse discussion around potential issues associated with the management of disaster waste. Regionally, model estimates showed that the earthquake scenario would generate the highest total volume of disaster waste (1.94 million m³), compared to the tsunami scenario (1.89 million m³) and the flood scenario (173,900 m³). Flood waste estimates are likely underrepresented due to limited flood modelling coverage, but still provide a valuable comparison. Whilst waste estimates differ significantly between districts, waste volumes were shown to be not solely dependent on building/population density. The district-level workshops showed that DWM challenges revolved around logistical constraints, public concerns, governance complexities, and environmental issues. Future work should further enhance this estimation model and apply it to other regions of Aotearoa New Zealand, to help develop a set of cohesive DWM plans for each region. The waste estimation model could also be adapted and applied internationally. The findings from this research provide a foundation for advancing DWM planning and stakeholder engagement in the Waitaha-Canterbury region. By offering region-specific waste estimates across multiple hazard scenarios, this work supports district councils and emergency managers in developing informed, proactive strategies for disaster preparedness and response. The insights gained from district-level workshops highlight key challenges that must be addressed in future planning. These outcomes contribute to a broader research agenda for DWM in Aotearoa New Zealand, and offer a framework adaptable to international contexts.
