A faded sign reading, 'Marrow Bassett & Co' painted onto the side of a brick building, revealed by the demolition of the adjoining building.
Seen through a cordon fence, traces of bricks from a demolished building adhere to the concrete wall of the adjoining building, also being demolished.
Seen through a cordon fence, traces of bricks from a demolished building adhere to the concrete wall of the adjoining building, also being demolished.
A photograph of a painting on the wall of a brick building. The artwork depicts a group of people sitting around a birthday cake.
A photograph of a painting on the wall of a brick building. The artwork depicts a group of people sitting around a birthday cake.
A damaged brick wall around a courtyard garden on Ash Street, seen from Madras Street. The Alice in Videoland building can be seen in the background.
A damaged substation on Sumner Road in Lyttelton. The crack runs through the brickwork on the upper right-hand side and some of the bricks are missing.
Bob Charles', a Gap Golf course on a the site of a demolished building. It has been built by Gap Filler out of bricks and green felt.
Bob Charles', a Gap Golf course on a the site of a demolished building. It has been built by Gap Filler out of bricks and green felt.
A photograph looking across a cleared building site in Cathedral Square. On the building ahead, the silhouette of a previously-neighbouring building has been created by exposed bricks.
An abandoned residential property at 19 Waygreen Avenue in New Brighton. The section is overgrown with weeds. A single brick fence post remains standing. The gutter has flooded.
A mini golf course on a the site of a demolished building. It has been built by Gap Filler out of planks of wood, stones, bricks and green felt.
Double Dipper', a Gap Golf course on a the site of a demolished building. It has been built by Gap Filler out of planks of wood, stones, bricks and green felt.
A faded sign reading, 'McCormic Reapers & Binders' painted onto the side of a brick building, revealed by the demolition of the adjoining building. Wooden pallets have been placed at the front of the building.
An abandoned residential property at 15 Seabreeze Close in Bexley. The front yard and footpath are covered with weeds and silt from liquefaction. A cluster of bricks lie in the grass.
A photograph of a damaged brick building on High Street. In the background, Ronnie Van Hout's installation, 'Comin' Down', is visible on the roof of the Alice in Videoland building.
A photograph of a damaged brick building on High Street. In the background, Ronnie Van Hout's installation, 'Comin' Down', is visible on the roof of the Alice in Videoland building.
A photograph of a damaged brick building on High Street. In the background, Ronnie Van Hout's installation 'Comin' Down' is visible on the roof of the Alice in Videoland building.
A photograph of an empty building site on the corner of Lichfield Street and Madras Street. A mural commissioned by Gap Filler titled 'Knit Happens' has been painted on the brick wall in the corner of the remaining buildings.
A photograph of artificial flowers, a stage light, and a platform of bricks inside a large, transparent plastic bubble. The set-up was part of Canterbury Tales - a carnivalesque procession which was the main event of FESTA 2013.
An abandoned residential property at 32 Waygreen Avenue in New Brighton. The front of the section is overgrown with weeds and silt from liquefaction. One brick fence posts remain upright and two others have toppled onto the grass. The gutter has partly flooded.
An abandoned residential property at 4 Waireka Lane in Bexley. The driveway is covered with weeds and silt from liquefaction. One of the garage doors is twisted and the other has 'HM' spray-painted on it. The number four has been spray-painted on the brick wall under the window.
According to the sign it can take about 30 minutes to walk from the entry point (near the small statue) to the centre and out again. What you can do with a few thousand old bricks and gravel. See next photo for more detail.
A photograph taken near the intersection of Manchester Street, Lichfield Street and High Street. A mural has been painted on a brick wall. Behind this is the old Post Office building (now C1 Espresso). There is a sculpture by Ronnie Van Hout on the roof.
A photograph taken near the intersection of Manchester Street, Lichfield Street and High Street. A mural has been painted on a brick wall. Behind this, the old Post Office building which now houses C1 Espresso can be seen with Ronnie Van Hout's sculpture on the roof.
Pallet Golf', a Gap Golf course on a the site of a demolished building. It has been built by Gap Filler to look like a journey through Christchurch. A plastic road cone as well as mini road cones, road signs, tunnels and rivers can be seen. The course has been built using green felt, wooden pallets, tyres, planks of wood and bricks.
The connections between walls of unreinforced masonry (URM) buildings and flexible timber diaphragms are critical building components that must perform adequately before desirable earthquake response of URM buildings may be achieved. Field observations made during the initial reconnaissance and the subsequent damage surveys of clay brick URM buildings following the 2010/2011 Canterbury, New Zealand earthquakes revealed numerous cases where anchor connections joining masonry walls or parapets with roof or floor diaphragms appeared to have failed prematurely. These observations were more frequent for adhesive anchor connections than for through-bolt connections (i.e. anchorages having plates on the exterior façade of the masonry walls). Subsequently, an in-field test program was undertaken in an attempt to evaluate the performance of adhesive anchor connections between unreinforced clay brick URM walls and roof or floor diaphragms. The study consisted of a total of almost 400 anchor tests conducted in eleven existing URM buildings located in Christchurch, Whanganui and Auckland. Specific objectives of the study included the identification of failure modes of adhesive anchors in existing URM walls and the influence of the following variables on anchor load-displacement response: adhesive type, strength of the masonry materials (brick and mortar), anchor embedment depth, anchor rod diameter, overburden level, anchor rod type, quality of installation and the use of metal mesh sleeve. In addition, the comparative performance of bent anchors (installed at an angle of minimum 22.5o to the perpendicular projection from the wall surface) and anchors positioned horizontally was investigated. Observations on the performance of wall-to-diaphragm connections in the 2010/2011 Canterbury earthquakes, a snapshot of the performed experimental program and the test results and a preliminary proposed pull-out capacity of adhesive anchors are presented herein.
The connections between walls of unreinforced masonry (URM) buildings and flexible timber diaphragms are critical building components that must perform adequately before desirable earthquake response of URM buildings may be achieved. Field observations made during the initial reconnaissance and the subsequent damage surveys of clay brick URM buildings following the 2010/2011 Canterbury, New Zealand earthquakes revealed numerous cases where anchor connections joining masonry walls or parapets with roof or floor diaphragms appeared to have failed prematurely. These observations were more frequent for adhesive anchor connections than for through-bolt connections (i.e. anchorages having plates on the exterior façade of the masonry walls). Subsequently, an in-field test program was undertaken in an attempt to evaluate the performance of adhesive anchor connections between unreinforced clay brick URM walls and roof or floor diaphragm. The study consisted of a total of almost 400 anchor tests conducted in eleven existing URM buildings located in Christchurch, Whanganui and Auckland. Specific objectives of the study included the identification of failure modes of adhesive anchors in existing URM walls and the influence of the following variables on anchor load-displacement response: adhesive type, strength of the masonry materials (brick and mortar), anchor embedment depth, anchor rod diameter, overburden level, anchor rod type, quality of installation and the use of metal mesh sleeve. In addition, the comparative performance of bent anchors (installed at an angle of minimum 22.5o to the perpendicular projection from the wall surface) and anchors positioned horizontally was investigated. Observations on the performance of wall-to-diaphragm connections in the 2010/2011 Canterbury earthquakes, a snapshot of the performed experimental program and the test results and a preliminary proposed pull-out capacity of adhesive anchors are presented herein. http://www.confer.co.nz/nzsee/ VoR - Version of Record
It is well known that buildings constructed using unreinforced masonry (URM) are susceptible to damage from earthquake induced lateral forces that may result in partial or full building collapse. The 2010/2011 Canterbury earthquakes are the most recent New Zealand example of destructive earthquakes, which have drawn people's attention to the inherent seismic weaknesses of URM buildings and anchored masonry veneer systems in New Zealand. A brief review of the data collected following the 2010 Darfield earthquake and more comprehensive documentation of data that was collected following the 2011 Christchurch earthquake is presented, along with the findings from subsequent data interrogation. Large stocks of earthquake prone vintage URM buildings that remain in New Zealand and in other seismically active parts of the world result in the need for minimally invasive and cost effective seismic retrofit techniques. The principal objective of the doctoral research reported herein was to investigate the applicability of near surface mounted (NSM) carbon fibre reinforced polymer (CFRP) strips as a seismic improvement technique. A comprehensive experimental program consisting of 53 pull tests is presented and is used to assess the accuracy of existing FRP-to-masonry bond models, with a modified model being proposed. The strength characteristics of vintage clay brick URM wall panels from two existing URM buildings was established and used as a benchmark when manufacturing replica clay brick test assemblages. The applicability of using NSM CFRP strips as a retrofitting technique for improving the shear strength and the ductility capacity of multi-leaf URM walls constructed using solid clay brick masonry is investigated by varying CFRP reinforcement ratios. Lastly, an experimental program was undertaken to validate the proposed design methodology for improving the strength capacity of URM walls. The program involved testing full-scale walls in a laboratory setting and testing full-scale walls in-situ in existing vintage URM buildings. Experimental test results illustrated that the NSM CFRP technique is an effective method to seismically strengthen URM buildings.
A suburban "red zone" house from Velsheda Street (#11), Pacific Park, is finally cut in half and loaded ready for transport out and a future life somewhere else in the South Island, whether it be close by or way down south in Gore or Clinton (where a few have gone already). The house has been stripped of it's bricks and jacked up for over four m...