A photograph of a row of images of faces pasted on a wall. The photograph is captioned by Paul Corliss, "Ferrymead, wall between Tidal View and Ferry Road".
A photograph of a row of images of faces pasted on a wall. The photograph is captioned by Paul Corliss, "Ferrymead, wall between Tidal View and Ferry Road".
A photograph of a row of images of faces pasted on a wall. The photograph is captioned by Paul Corliss, "Ferrymead, wall between Tidal View and Ferry Road".
A photograph of a row of images of faces pasted on a wall. The photograph is captioned by Paul Corliss, "Ferrymead, wall between Tidal View and Ferry Road".
A photograph of a row of images of faces pasted on a wall. The photograph is captioned by Paul Corliss, "Ferrymead, wall between Tidal View and Ferry Road".
A wall exposed by the removal of a damaged building has been decorated by Gap Filler with a knitting-like pattern. The adjoining wall has been graffitied.
Part of Maffeys Road around McCormacks Bay has collapsed.
Damage to the north side of ChristChurch Cathedral. The damaged windows have been boarded up and weeds can be seen growing in the lawn. A walkway from Gloucester Street to the Square was opened up for a few days to allow the public a closer look at the cathedral.
During the 2010/2011 Canterbury earthquakes, several reinforced concrete (RC) walls in multi-storey buildings formed a single crack in the plastic hinge region as opposed to distributed cracking. In several cases the crack width that was required to accommodate the inelastic displacement of the building resulted in fracture of the vertical reinforcing steel. This type of failure is characteristic of RC members with low reinforcement contents, where the area of reinforcing steel is insufficient to develop the tension force required to form secondary cracks in the surrounding concrete. The minimum vertical reinforcement in RC walls was increased in NZS 3101:2006 with the equation for the minimum vertical reinforcement in beams also adopted for walls, despite differences in reinforcement arrangement and loading. A series of moment-curvature analyses were conducted for an example RC wall based on the Gallery Apartments building in Christchurch. The analysis results indicated that even when the NZS 3101:2006 minimum vertical reinforcement limit was satisfied for a known concrete strength, the wall was still susceptible to sudden failure unless a significant axial load was applied. Additionally, current equations for minimum reinforcement based on a sectional analysis approach do not adequately address the issues related to crack control and distribution of inelastic deformations in ductile walls.
The connections between walls of unreinforced masonry (URM) buildings and flexible timber diaphragms are critical building components that must perform adequately before desirable earthquake response of URM buildings may be achieved. Field observations made during the initial reconnaissance and the subsequent damage surveys of clay brick URM buildings following the 2010/2011 Canterbury, New Zealand earthquakes revealed numerous cases where anchor connections joining masonry walls or parapets with roof or floor diaphragms appeared to have failed prematurely. These observations were more frequent for the case of adhesive anchor connections than for the case of through-bolt connections (i.e. anchorages having plates on the exterior façade of the masonry walls). Subsequently, an in-field test program was undertaken in an attempt to evaluate the performance of adhesive anchor connections between unreinforced clay brick URM walls and roof or floor diaphragm. The study consisted of a total of almost 400 anchor tests conducted in eleven existing URM buildings located in Christchurch, Whanganui and Auckland. Specific objectives of the study included the identification of failure modes of adhesive anchors in existing URM walls and the influence of the following variables on anchor load-displacement response: adhesive type, strength of the masonry materials (brick and mortar), anchor embedment depth, anchor rod diameter, overburden level, anchor rod type, quality of installation and the use of metal foil sleeve. In addition, the comparative performance of bent anchors (installed at an angle of minimum 22.5o to the perpendicular projection from the wall surface) and anchors positioned horizontally was investigated. Observations on the performance of wall-to-diaphragm connections in the 2010/2011 Canterbury earthquakes and a snapshot of the performed experimental program and the test results are presented herein. http://hdl.handle.net/2292/21050
A photograph captioned by Paul Corliss, "Great Wall of Sumner".
A photograph captioned by Paul Corliss, "Great Wall of Sumner".
A woman standing by the wall of the Pallet Pavilion.
A photograph of the remaining walls of the Copthorne Hotel.
A photograph captioned by Paul Corliss, "Great Wall of Sumner".
A PDF copy of pages 284-285 of the book Christchurch: The Transitional City Pt IV. The pages document the transitional project 'Phoenix Wall Re-Painted...'. Photo: Reuben Woods
The connections between walls of unreinforced masonry (URM) buildings and flexible timber diaphragms are critical building components that must perform adequately before desirable earthquake response of URM buildings may be achieved. Field observations made during the initial reconnaissance and the subsequent damage surveys of clay brick URM buildings following the 2010/2011 Canterbury, New Zealand earthquakes revealed numerous cases where anchor connections joining masonry walls or parapets with roof or floor diaphragms appeared to have failed prematurely. These observations were more frequent for adhesive anchor connections than for through-bolt connections (i.e. anchorages having plates on the exterior façade of the masonry walls). Subsequently, an in-field test program was undertaken in an attempt to evaluate the performance of adhesive anchor connections between unreinforced clay brick URM walls and roof or floor diaphragms. The study consisted of a total of almost 400 anchor tests conducted in eleven existing URM buildings located in Christchurch, Whanganui and Auckland. Specific objectives of the study included the identification of failure modes of adhesive anchors in existing URM walls and the influence of the following variables on anchor load-displacement response: adhesive type, strength of the masonry materials (brick and mortar), anchor embedment depth, anchor rod diameter, overburden level, anchor rod type, quality of installation and the use of metal mesh sleeve. In addition, the comparative performance of bent anchors (installed at an angle of minimum 22.5o to the perpendicular projection from the wall surface) and anchors positioned horizontally was investigated. Observations on the performance of wall-to-diaphragm connections in the 2010/2011 Canterbury earthquakes, a snapshot of the performed experimental program and the test results and a preliminary proposed pull-out capacity of adhesive anchors are presented herein.
The connections between walls of unreinforced masonry (URM) buildings and flexible timber diaphragms are critical building components that must perform adequately before desirable earthquake response of URM buildings may be achieved. Field observations made during the initial reconnaissance and the subsequent damage surveys of clay brick URM buildings following the 2010/2011 Canterbury, New Zealand earthquakes revealed numerous cases where anchor connections joining masonry walls or parapets with roof or floor diaphragms appeared to have failed prematurely. These observations were more frequent for adhesive anchor connections than for through-bolt connections (i.e. anchorages having plates on the exterior façade of the masonry walls). Subsequently, an in-field test program was undertaken in an attempt to evaluate the performance of adhesive anchor connections between unreinforced clay brick URM walls and roof or floor diaphragm. The study consisted of a total of almost 400 anchor tests conducted in eleven existing URM buildings located in Christchurch, Whanganui and Auckland. Specific objectives of the study included the identification of failure modes of adhesive anchors in existing URM walls and the influence of the following variables on anchor load-displacement response: adhesive type, strength of the masonry materials (brick and mortar), anchor embedment depth, anchor rod diameter, overburden level, anchor rod type, quality of installation and the use of metal mesh sleeve. In addition, the comparative performance of bent anchors (installed at an angle of minimum 22.5o to the perpendicular projection from the wall surface) and anchors positioned horizontally was investigated. Observations on the performance of wall-to-diaphragm connections in the 2010/2011 Canterbury earthquakes, a snapshot of the performed experimental program and the test results and a preliminary proposed pull-out capacity of adhesive anchors are presented herein. http://www.confer.co.nz/nzsee/ VoR - Version of Record
The eastern face of Christ Church Cathedral. The damaged windows have been boarded up. A shipping container sits in the overgrown garden.
A photograph of Whole House Reuse item 65. This item was salvaged from 19 Admiral Way in New Brighton as part of the Whole House Reuse project.
A photograph of a colourful painted wall in Re:START mall.
A photograph of graffiti by DEAK on a wall in Cashel Street.
One wall is all that remains of this building on Madras Street.
Spraypainted messages on a damaged building read "Party wall" and "Look up".
Empty picture frames on the exposed wall of a building on Madras Street.
A partially deconstructed house in Bexley. The roof cladding and parts of the wall cladding have been removed. The photographer comments, "Today I took a drive around the residential area between Bexley and New Brighton. It was a stark reminder to be thankful for the situation we're in and perhaps not complain too much that our garden wall hasn't yet been rebuilt".
None
The damaged Peterborough Centre, surrounded by fences. Stacked shipping containers act as a retaining wall.
A damaged brick wall around a courtyard garden on Ash Street, seen from Madras Street.
A photograph of sponsors' logos on the wall at Chambers art gallery on Moorhouse Avenue.